#4
WAIIIT!!! dude you need to run that mixer though an amp !!!
the out of the mixer to a power amp.....
Quote by Nick111111111
Am i missing some thing
car speaker=12 watts
outlet=120 watts
?????????????????

laws of phisics down the dump....... volts and watts are the same
#6
I'm kind of a noob at this so someone please explain to me how the setup goes, from mixer to amp, from mixer to power amp?
#7
Unless it's a powered mixer, you need to run it out to an amp/head, and then out to the cabs.
My Gear
Ibanez SR520EX with EMG 81/85 and boost
Peavey Valveking Head w/ Crate Blue Voodoo Cab
Peavey VB-2
Spector Euro 4
Boss NS-2
Boss TU-2
#8
amp: http://www.guitarcenter.com/shop/product/buy_fender_fm_212r_guitar_combo_amp?full_sku=102481991

mixer (not powered): http://www.guitarcenter.com/shop/product/buy_peavey_pv8_mixer?full_sku=104006341

Ok, from what I'm understanding one cable goes from the mixer main 1 outlet to input 1 of amp and output 2 of mixer to input of amp(or is it only one). Then a cable from the pre-out of amp to one of the cabinet. If this is so then am I forced to link the two cabinets together? Sorry for the hassle but I've been looking around online and I just come up with more questions.
#9
The mixer sends out a passive signal. Very little power to it. Just enough to produce sound, but not alot of volume. I ran into the same problem at work, I didn't buy mixer or speakers. Coincidentally, it was that same mixer.

You need a powered mixer, or powered speakers.

As for the outputs, one output for one speaker, one output for the other.
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club
#11
None. You need a new mixer.
Will says:
DON'T FEAR THE REAPER!
- SmarterChild - says:
I don't know if I can help it.

Member #6 of the "I play my guitar as high as Tom Morello does" club