Page 1 of 13
#1
Hey. It's ECistheBest from ShotRod Guitar Works from Los Angeles, California. I intend to sell quite a few things that either don't fit my taste, or things that i don't need anymore (since an upgrade. not cuz it broke or anything).

NEW!!! Voxy Lady Line RELEASED!!!


Most prices are pretty firm, but some can be negotiable. (some that's been posted here for quite a while.) So here are the current listings:


Dunlop Crybaby Wah Replacement Circuit Board
Quantity Available: 1, early 90s model.
It's just a circuit board gutted out of a crybaby original. with jacks, inductor, everycomponent on it. to replace ur board, u just have to take your crybaby's 10pin connector, unscrew ur existing jack, unscrew another screw, take the old board out, put the new board in, put back together. no soldering required. This is going for $20 + shipping.
I can also do my mods on this board if you want me to too. so if you don't want to send in ur wah, u can purchase one of these with my mods, and replace ur own.


Dunlop Crybaby Wah Shell
Includes the wah shell, four rubber feet, bottom plate and battery cover. it's from a crybaby original. This is going for $30 + shipping.


BYOC "Mighty Mouse" RAT clone:
This unit is a pedal I built from BuildYourOwnClones.com. The vintage RAT specs with true bypass. it has a 3-way switch that can select between Marshall Rat, Turbo Rat, and Clean super boost Rat modes. It's a full-on Distortion pedal, and for the sound, you can visit my profile to hear the soundclip of the rat through my Blues Jr. the enclosure is left bare metal, so refer to below for painting.

PRICE DROP This prebuilt unit is $90 + shipping. If you want it painted, specify a color and send me $5. i'll paint it for $5, and then pay me the $100 when i ship it. reason for that is that it takes about 5 days to paint. if u want it quick, i can do 3-days tho. I don't want people to cancel their order but with the paint on the enclosure.


Fender Hot Noiseless Stratocaster Pickup Set (set of 3)
This one is a set of pickups that i've used on my Strat for about 10 months. nice versatile pickup that has a unique Noiseless technology that eliminates the single coil hum!!! It has a stacked humbucker configuration, with just one end sticking out for the strings, so it has the true single coil tone with NO NOISE!!! it suffers a little lack of highend chime, but it was acceptable for me.

This one's going away for $70 + shipping.
Specs of the Pickups are here: http://www.fender.com/products//search.php?partno=0992105000
I'll ship with full mounting hardware, in a box, and wiring instruction if you ask.


Wah Wah Pedal Modifications:

For modifications on:
-a NEW crybaby, Base Price is $80.
-me buying Used Crybaby from eBay option is discontinued.
-Sending in your OWN crybaby is free.
-***LT: Leadtime

Wah Modification Prices:
 True-Bypass *********************
 -DPDT switch ************  $7 ***LT: 5-7 days
 -Carling DPDT switch ****  $9 ***LT: 1-2 weeks

 True-Bypass with 3PDT, no LED $10 ***LT: 1-2 weeks
 -3PDT Switch ************ $10

 True-Bypass w/ LED ********* $13 ***LT: 1-2 weeks
 -3PDT switch ************ $10
 -LED ********************  $2
 -drill labor ************  $1

 Mid-Boost ******************* $1 ***LT: 3-5 days
 -2.2k *******************  $1

 Mid-Boost Knob ************** $5 ***LT: 1-2 weeks
 -1.8k *******************  $1
 -2k Linear Pot **********  $3
 -drill labor ************  $1

 Vocal Mod ******************* $1 ***LT: 3-5 days
 -47k ********************  $1
 -56k ********************  $1
 -68k ********************  $1
 -100k *******************  $1

 Q-Dial (Vocal knob) ********* $5 ***LT: 1-2 weeks
 -33k ********************  $1
 -100k Linear Pot ********  $3
 -drill labor ************  $1

 Gain/Bass ******************* $1 LT: 3-5 days
 -270 ohm ****************  $1

 Sweep cap ******************* $1 ***LT: 1-2 weeks
 -0.022uF ****************  $1

 Sweep Cap Switch ************ $7 ***LT: 2-3 weeks
 -0.01uF *****************  $1
 -0.022uF ****************  $1
 -DPDT Mini Toggle *******  $4
 -drill labor ************  $1

 Sweep Cap Micro Tune ******** $6 ***LT: 2-3 weeks
 -0.0047uF ***************  $1
 -DPDT Mini Toggle *******  $4
 -drill labor ************  $1

 New Pot ************************
 -Black Bear 100k ICAR *** $25 LT: ***LT: 1-3 weeks

 New Inductor *******************
 -Eleca Halo Inductor **** $28 ***LT: 2-3 weeks
 -Whipple Inductor ******* $33 ***LT: 1-3 weeks

 New Set of Transistors ***** $6 ***LT: 1-2 weeks
 -BC109C x2 **************  $6

 Increase of Sweep ********** $Free. ask me for instructions, do it yourself. 
 
 Volume Pedal Switch ******** $6 ***LT: 1-2 weeks

When mod purchases go over $35, $5 off from the total.

Additional shipping is charged after the whole operation.



ShotRod Guitar Works Presents:
Voxy Lady
(and assorted modifications)
Voxy Lady FullBlown:
-Completely new Circuit Board $6
-Resistors for Clyde Specs $3
-Caps for Clyde Specs $4
-BC109 Transistors $6
-Metal Input/Output Jacks $5
-DC Jack $2
-Battery Clip $1
-True Bypass (Carling DPDT Switch) $9
-Whipple Inductor $33
-Blackbear 100k Pot $25

Total: $94 Leadtime: 2~4 weeks


Voxy Lady Full Spec Mod:
-True Bypass (Carling DPDT Switch) $9
-Whipple Inductor $33
-Blackbear 100k Pot $25
-New BC109 Transistors $6
-New Resistors for Clyde Specs $3
-New Caps for Clyde Specs $4

Total: $80 Leadtime: 1-3 weeks


Voxy Lady Jr Mod:
-True Bypass (X-wing DPDT) $7
-Blackbear 100k Pot $25
-New Resistors for Clyde Specs $3
-New BC109 Transistors $6
-New Caps for Clyde Specs $4

Total: $45 Leadtime: 1-2 weeks


Voxy Lady MiniMod:
-New Resistors for Clyde Specs $3
-New Caps for Clyde Specs $4
-True Bypass (X-wing DPDT) $7

Total: $16 Leadtime: 5-7 days


-wah mods are only available for certain models. dunlop original crybaby, vox v847 are the common ones. PM me if you have anything else.
-for custom pedal building, PM me first.
-for repairs, send me a pic of the inside of the guitar, the condition, symptoms, etc.

How to Calculate Leadtimes on wah mods: Leadtime is the time I will take to finish the Modification after I receive your wah, or get a wah on hand. Leadtimes are in Business days. My Business days are Tuesdays, Thursday~Sunday. Figure out which mods you are going to do, and the longest leadtime out of your mods is your wah modification's leadtime. I'll do my best to finish early, but please bear my college student'ness if i'm kinda slow.

Note about Leadtimes: Subject to change without (but i hope with) notice.


Payment: I'll accept Paypal, Personal Checks, Postal Money Order, or COD (collect on delivery) from USPS. COD fee is about $5, but it is not risky. You pay when you get the item.

Shipping: I'll ship via USPS if there's no specific shipping company you like. FYI, USPS is by far the cheapest to ship through the US. If you need COD, USPS will be the one. If you don't, and really prefer UPS or FedEx, i can do that too. just costs a bit more. I'll gladly try to ship internationally, but for some items, the customs reject the products and It doesn't work out. You'll have to pay extra shipping too. so for these kinds of information, please POST here FIRST.

DISCLAIMER: Please think my business as the middle between building/modding yourself, and a professional job. I've repaired dozens of pedals, modded dozens of pedals, build dozens of pedals, but not a professional.


Thanks for reading!!! I appreciate it!

Last Updated: 5/12/08 - Yes, they're still on sale.


If PMing doesn't work (if i have a full inbox) feel free to E-mail me here: shotgoto@yahoo.com

Sincerely,
Shot, aka ECistheBest
ShotRod Guitar Works Est. 2007
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
Last edited by ECistheBest at May 12, 2008,
#3
yea thanks. please check out the soundclip for the RAT on my profile.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#5
yes i should. but i have more available modifications. so i don't really want to limit it. it's basically the sound you hear from my recordings of my songs. most of them have the tube screamer used.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#7
asymmetrical clipping, linear 2k tone pot, higher input impedance
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#9
yes. if you request it, i will modify it to fit your needs. you can ask me to modify to a specific kind of overdrive, or just tell me the genre you play and what you need the pedal to do. there's a lot which can be done.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#11
True Bypass is standard on the Rat. full 3PDT switch is used. Absolute true bypass.

however, space is limited on the Guv'nor and the TS9, so they are still hardwire bypass, and buffered bypass respectively.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#15
^yes, and i'll PM you AND e-mail you right at this moment.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#17
i'm gonna head on over to the post office in a couple of minutes...
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#19
if i do an asymmetrical clipping mod, it sounds like a fuzz. and u know. fuzz kinda means zeppelin. page used that soft fuzz on many songs. his live tone is all marshall though. i can get a marshall sound out of it too. LEDs in the clipping section sounds really marshally.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#20
Hmm quite interesting sounding... I orginally was going to built an MKII, but that live marshally tone is pure sex.
#21
^yes it is. i love that marshall roar. Jim got a ton of it.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#23
^yea. it makes everything awesome when you dig in on the strings. freaking orgasmic!!!@!@
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#26
^thanks guys.

BYOC Rat and Modified TS9 still on sale.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#27
new item 9/15/07:
Used Fender Hot Noiseless Stratocaster Pickup Set

nice upgrade from your stock single coils without the HUM!!@
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#29
^now that's what it's all about. - John Madden
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#30
bump... all three items still on sale.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#31
Bump because EC is a nice fella and because I like Tube Screamer lore

The TS9 is a modern one, modded by you? It looks mint on the outside?

<--- considering the TS9. Not sure if I want a mid hump boost or not, that's the thing.
freepatriot.com
"People never misapply their economy so much as when they make mean provision for the education of children. The only practicable method to reform mankind is to begin with children." -- Noah Webster
#32
It's a modern TS9, but modified by me to the TS808 specs and some extra groovy modifications.

it's got no dings, but it has a Blue LED now. so... (i guess its considered not mint. its better. )

the mid hump boost, is basically a bass boost. i like it, but if you want more of a mid boost, i can take it off too.

and if you read the first post one more time, it says i can mod it to your specs. (to some extent.) so tell me what kind of sound you want and we can talk.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#33
PM'd
Quote by Dave_Mc
I've had tube amps for a while now, but never actually had any go down on me
Quote by jj1565
maybe you're not saying the right things? an amp likes to know you care.





www.SanctityStudios.com
#35
Quote by ECistheBest
and if you read the first post one more time, it says i can mod it to your specs. (to some extent.) so tell me what kind of sound you want and we can talk.


Yep, I saw that. I'll PM you my number and we can chat about it.

Scott
freepatriot.com
"People never misapply their economy so much as when they make mean provision for the education of children. The only practicable method to reform mankind is to begin with children." -- Noah Webster
#36
ill try somehow to get some money together for something. ill keep an eye on the thread. the Noiseless pickup set would be great if i had a Strat.
#37
all three are still on sale. i'll be back in probably 30 mins.

i'll be taking PMs (ofcourse) and i will give priority to the person who PMs earliest.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#39
it's short for "Build Your Own Clones". it's a place where you can buy kits to make a pretty decent pedal.

some people find it hard to make it, so i make it for them, and sell it for a reasonable price. if you ask, i can make most of those pedals for you.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard