#1
Does anyone know of a way to lock the bridge in place so it doesn't move. I use allot of alternate tunings and its much harder when i have to adjust the bridge every time.
#2
666ogre666
Quote by breakdown123
Is there such a thing as a heavy riff with out chugging on the e string?
#3
Only the Tremel-No. You can switch between full floating, dive-only, or fully locked. Costs about $65 dollars and totally worth it. Go to the website and watch all the demo videos.
Daron. The Pit loves you.
daron aka kosmic is now a pit legend
Best post on the pit. Good for you.
thats pretty epic.
So you're like a slower paced Forrest Gump...
Yup...
#4
Quote by kosmic
... Costs about $65 dollars and totally worth it. ...


holy cow. i say MAJOR rip-off. you could make something yourself with $15 of stuff from a hardware store.

this just came to mind:
measure the distance from the back of the tension-spring block to the the cavity route wall. then mesure the other side. get a block of wood and cut to the measurements. them tape them to the tension-spring block.