#1
I just got a Hot Rod off ebay, but when I plug it in, I don't get any noise, and the light doesn't turn on when I press it. I've used my adaptor, (9V 1000mA - centerpin) with this, and it still doesn't work.

Any suggestions?
#3
check out hte wiring
[IMG]http://img398.imageshack.us/img398/9148/dawhip005jf4.jpg[/IMG]

Quote by SuperSamuraiGuy
Thanks for answering all my question ssguitar



JCM900 FOR SELL!
#4
The screw things on the bottom are Allan keys, and I don't know if it's safe to open up.
#5
yea its fine. i promise, just open it up and check to see if any wires of loose
[IMG]http://img398.imageshack.us/img398/9148/dawhip005jf4.jpg[/IMG]

Quote by SuperSamuraiGuy
Thanks for answering all my question ssguitar



JCM900 FOR SELL!
#6
Ahh, my alan key set doesn't have the right size.

Also, when I plug it in it just makes a 'crackling' noise, and when I press it nothing turns on or changes, and the light doesn't turn on or off.
#7
I'm unable to open it any further than to see the bottom of the electrical board - the knobs keep it from moving...

Any suggestions?