#1
I'm trying to install 2 81's but I cant find a wiring diagram for a vol vol tone 3way switch..not toggle...Like the KH21 set.

Anyone have one or can help in any way?

I'm playing just through the bridge 81 right now.

Thanks in advance.
#2
use this one for the basic wiring(last picture)
http://www.emgpickups.com/downloads/wiringdiagrams/EMG-Hseries.pdf

use this to wire the 3 way instead of a toggle(last pic)
http://www.emgpickups.com/downloads/wiringdiagrams/EMG-KFKset.pdf

the only thing that changes is the toggle to 3way, you will still have 2 hots, one from each pickup, coming into the switch.
"The fool doth think he is wise, but the wiseman knows himself to be a fool." - W.S.
amp clips
amp vids
#3
Thanks thats real helpful...

Another question on the kfk diagram theres braid coming from point 1 on the switch to bottom node of the vol pot?? would I have to do this with the other vol pot and if so what number point on the switch ?

Thanks again
#4
that point 1 is the output from the switch, so that will be going to the tone pot, just like the middle wire on the toggle switch in the first diagram. That middle wire is the output from the toggle switch.
"The fool doth think he is wise, but the wiseman knows himself to be a fool." - W.S.
amp clips
amp vids
#5
exellent...so then I just solder the pick up wires to each vol then the hots to the switch ?
#6
yup, the braid on the pickup wire is the ground, that's what gets soldered to each pot.
"The fool doth think he is wise, but the wiseman knows himself to be a fool." - W.S.
amp clips
amp vids
#10
actually, that won't work. You need the hots to go to the middle lug like the first diagram I showed you. After the pots is correct, but why did you move the hots over like that on the pots?
"The fool doth think he is wise, but the wiseman knows himself to be a fool." - W.S.
amp clips
amp vids
#11
Think I got it now ..Gonna try later ...Cheers for the info ..Much appreciated