#1
I replaced the stock Seymour Duncans in my LTD H1000 a while back with an EMG 81,85 set. The volume and tone pots come wired together, but my guitars pot holes are farther apart than the factory wiring allows. I've tried a few things like soldering an extension to one of the capacitor wires. I've gone without a functioning tone pot for a while, and I want a functional pot now. Any help would be appreciated.
#2
It can be tricky to splice a wire onto a cap lead with out the little helping hands things. Or you can splice the cap between the lug going to ground and ground. And just run a wire from the vol pot to the lug where the cap used to go.