#1
Well I just ordered a set of dream 90s for my hamer vector (HH 2 volume 1 tone 3 way switch) and the supplied wiring diagram is essentially irrelevant to me, also all of SD's wiring diagrams have 5 wires so I'm a little confused, this is my first attempt at swapping pups out.

I have a red wire, a white wire and a bare silver wire... so... what the heck do I do?

diagrams would be appreciated if they exist anywhere, i've googled but to little avail

Thanks.
Quote by Kutanmoogle
Now introducing Megabreth, Dave Mustaine's signature Tic-Tac!


Member of the ENGL Family

Gear:

Hamer Vector
OLP John Petrucci
ENGL Thunder 50
EHX Holy Grail
EHX Small Clone
EHX Big Muff USA
Boss DD-3
Vox V847
Korg Toneworks OD
#2
Ok...look here:
http://www.seymourduncan.com/support/wiring-diagrams/
They have pretty much every picking wiring configuration you could ever think of.

Also get this one:
http://www.seymourduncan.com/pdfs/support/schematics/color_codes.pdf
#3
1 - use this drawing from SD.
http://www.seymourduncan.com/images/support/schematics/2h_1v_1t_3w.jpg

2 - Connect the red wires from your pickups where the black wires are shown in the drawing.

3 - Connect the white wires from your pickups to where the green wires are shown in the drawing.

4 - Connect the bare wires from your pickups to where the bare wires are shown in the drawing.

5 - Rock on.
Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.
#4
many thanks SYK
Quote by Kutanmoogle
Now introducing Megabreth, Dave Mustaine's signature Tic-Tac!


Member of the ENGL Family

Gear:

Hamer Vector
OLP John Petrucci
ENGL Thunder 50
EHX Holy Grail
EHX Small Clone
EHX Big Muff USA
Boss DD-3
Vox V847
Korg Toneworks OD