I have an Engl Screamer 50W Combo.

It has 4 ports for hooking up a cab.

I also have a Marshall 4 x 12 1960A.


What goes to where and what do I set the mono/stero swtich on the cab on?

Can't attach a picture of the engl ports but you can see the details here.


You have two choices. You can use the cab in mono 16 ohms, and plug it into one of the 16 ohm outputs in your head. Or you can get two speaker cables and run the cab in stereo and run them both to the two 16 ohm outputs.

Couldn't tell you if your head will actually give you a stereo effect making the second option worthwhile, though.
You Don't Need a halfstack.

You Don't Need 100W.

Quote by jj1565
i love you slats.