#1
Hey, I have an ESP MH-1000 with 10's on it right now, and I unlocked it and tuned it down to C standard, and it had alot of fret buzz. I just bought some 11s though. With these 11s and being correctly set up, could I put it in C standard with no fret buzz?
P.S. It's down a half step with the 10s, and its fine.... but any lower and it seems to start to buzz. Oh yeah, and if it makes any difference, it does have a floating, locking tremelo system.
#2
i have .12s on my bc rich in c standard. no fret buzz and it feels a bit like .9 or .10s in standard.
Quote by Peradactyl
alright, off topic but how do i make forum posts



Quote by The_Paranoia
a4lrocker is an offical thread legend.
#3
if you want to keep thin strings, i suggest just setting the neck tension. i play in C# standard, but play 9-46 gauge. plays like butter.
#4
some 11s or maybe 12s are ok
i have 10s for drop d and from time to time i get buzz(only on the low E string)
Gear:
LTD MH-1000
Ibanez RG350EX
ibanez GSA60
Line 6 Spider III 30W
Peavey ValveKing 112
Boss GE-7 EQ
Electro-Harmonix Small Clone Chorus
Digitech RP350
#5
Quote by wrathofthenorse
if you want to keep thin strings, i suggest just setting the neck tension. i play in C# standard, but play 9-46 gauge. plays like butter.

should teach me