#1
*EDIT* Here's some clips.


Single coil clean. Spanky and scooped a bit.
http://home.comcast.net/~leadfootdriver/ws.wma

Single coil with bridge humbucker. More bold and solid.
http://home.comcast.net/~leadfootdriver/swb.wma

Single mid gain. Pretty tonefull. Responds to what you're putting into it.
http://home.comcast.net/~leadfootdriver/mgs.wma

Single high gain. Searing, and cutting.
http://home.comcast.net/~leadfootdriver/hgs.wma

One thing about Ibanez guitars that I've noticed is that they're pretty dull sounding. Fender and Gibson really got it right.


-------------------------------------------------------------------------------------------------------

Sounds good. Sound clips latter. If you didn't know, the TW is both a humbucker, and a single coil in one. There's a push/pull volume pot that makes it happen. You could wire it on the tone if you wanted to.

There's a volume drop when I kick the single coil in on a clean tone. The sound is sparkly and spanky. But on a distorted tone, the volume loss isn't noticeable because of the single coil clairity. It cuts very well. It just sounds a bit more mid gain.


The word for today is HOG. As in hog out the electronics cavity.




I took my time, and didn't F it up too bad. Made enough room for 18 volts. That push/pull pot puts space at a premium. But I still managed to stuff it all in there!





The TW has the copper colored logo.
Last edited by leadfootdriver at Feb 28, 2008,
#2
Wow, muchos pointos on a good job. Pretty nifty stuff...is that a RG1750, or whatever the Prestige model with the trem is? Never saw one in blue.
#3
Quote by the.spine.surfs
Wow, muchos pointos on a good job. Pretty nifty stuff...is that a RG1750, or whatever the Prestige model with the trem is? Never saw one in blue.


It's a Vampires Kiss. It used to be wine red, but I painted it blue.
#4
thats pretty neat routing there man. u should wrap each battery with some cloth though.
Sincerely,
Shitstirrer
#5
Quote by macaroni
thats pretty neat routing there man. u should wrap each battery with some cloth though.


I've taken care of that. There's a layer of foam on the bottom. And a piece of cardboard isolates any posibility of the batteries contacting the volume pot, or selector switch.

It's a tight fit and nothing is going anywhere.
#7
whoah, brilliant playing on your myspace page man! Love your tunes!

The clips up top aren't coming up for me, and if the playing is like your myspace, please fix them!
"The fool doth think he is wise, but the wiseman knows himself to be a fool." - W.S.
amp clips
amp vids
#8
Quote by Erock503
whoah, brilliant playing on your myspace page man! Love your tunes!

The clips up top aren't coming up for me, and if the playing is like your myspace, please fix them!



Thanks! They seem to be working fine.
#10
Very nicely done. You've got some skills man, with a router and after you've put the thing back together.
I don't give a shit if you listen to me or not
#11
Quote by Kevin Saale
Very nicely done. You've got some skills man, with a router and after you've put the thing back together.



Thank you sir.
#12
Wow Thats cool!

Does having two 9 volts for your emg's double the output???
Framus Cobra
Marshall JCM 900
peavey 5150

Mesa 4x12
#13
Quote by Ubershall404
Wow Thats cool!

Does having two 9 volts for your emg's double the output???


No. YOu get more bass and and a more percussive attack. A little more dynamic.