#1
Hi.

I'm wondering what cables I will need to connect a Toneport UX1 to a pair of http://www.behringer.com/MS20/.

Connections-

Toneport - 1/4 Stereo Monitor IN, 2 1/4 analog Outs.

Monitors - 1/8" TRS stereo, 2 RCA, Toslink, digital coaxial RCA.

Any ideas?

thanks.

Play a Cort ?

Play with V-Picks ?

Every minute is to be Grasped........................................................................Time waits for nobody.

Last edited by Volta_91 at Feb 29, 2008,
#2
Looks like you would need a 1/4" to 1/8" adapter.
Irrelevant quote from obscure person
Obnoxious statement regarding size of e-ween
Italicized text indicating bandwagoning masquerading as deep thought
ASCII graphic that will take over the world if you put one in your signature
Made up statistic
#3
So, from the 1/4 stereo monitor in on the Toneport to the 1/8 line in on the speaker?

Play a Cort ?

Play with V-Picks ?

Every minute is to be Grasped........................................................................Time waits for nobody.

#4
OUT of the toneport IN to your monitors.
Irrelevant quote from obscure person
Obnoxious statement regarding size of e-ween
Italicized text indicating bandwagoning masquerading as deep thought
ASCII graphic that will take over the world if you put one in your signature
Made up statistic
#5
Ok. The analog outs on the toneport are labelled 1 and 2. Do you think this means there are 2 separate stereo outs or that they are left and right?

Play a Cort ?

Play with V-Picks ?

Every minute is to be Grasped........................................................................Time waits for nobody.

#6
I'm not really familiar with the Toneport but it looks like they have 2 analog outs labeled right and left. Use left to the left monitor and right to the right monitor.

DS
Irrelevant quote from obscure person
Obnoxious statement regarding size of e-ween
Italicized text indicating bandwagoning masquerading as deep thought
ASCII graphic that will take over the world if you put one in your signature
Made up statistic
#7
The monitors only have 1 stereo input, apart from the rcas.

Play a Cort ?

Play with V-Picks ?

Every minute is to be Grasped........................................................................Time waits for nobody.

#8
Ah. I thought I saw on the Behringer website that monitors had 1/8" inputs? I wish I could fina pic of the back of the monitors.

An alternative would be a 1/4" to rca adapter.
Irrelevant quote from obscure person
Obnoxious statement regarding size of e-ween
Italicized text indicating bandwagoning masquerading as deep thought
ASCII graphic that will take over the world if you put one in your signature
Made up statistic
#10
I would go the 1/4" to RCA adapter route then. I think you can get a premade cable from MF for pretty cheap.

DS
Irrelevant quote from obscure person
Obnoxious statement regarding size of e-ween
Italicized text indicating bandwagoning masquerading as deep thought
ASCII graphic that will take over the world if you put one in your signature
Made up statistic
#11
Ok, thanks for the help.

Play a Cort ?

Play with V-Picks ?

Every minute is to be Grasped........................................................................Time waits for nobody.