#1
The input jack on my bass guitar isn't in place, it slipped under the pickguard. So do I have to take the pickguard off to get at the thing and put it back in place? If so, how do I take off the pickguard?
#2
the pick guard should loosen up with a few turn of some screws, and you should be able to fix the jack, without taking everything apart......

guitarrocker1
#3
I'm pretty sure if you can get the jack with a pair of small needle nose pliers, you can grab it out. then just put a nut and a washer on it.
Current Gear:
LTD MH-400 with Gotoh GE1996T (EMG 85/60)
PRS SE Custom 24 (Suhr SSH+/SSV)
Ibanez RG3120 Prestige (Dimarzio Titans)
Squier Vintage Modified 70s Jazz V
Audient iD22 interface
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.
#4
Okay, I took off the pickguard and it turns out one of the wires is snapped, I can solder it back but I don't really know much about the insides of the guitar, is there any online explanation?
#5
search something like wiring guide for [insert bass make and model here]
Current Gear:
LTD MH-400 with Gotoh GE1996T (EMG 85/60)
PRS SE Custom 24 (Suhr SSH+/SSV)
Ibanez RG3120 Prestige (Dimarzio Titans)
Squier Vintage Modified 70s Jazz V
Audient iD22 interface
Peavey Revalver 4, UAD Friedman BE100/DS40
Adam S3A monitors
Quote by Anonden
You CAN play anything with anything....but some guitars sound right for some things, and not for others. Single coils sound retarded for metal, though those who are apeshit about harpsichord probably beg to differ.