#1
Okay, so I made my first venture into pickup swapping today. I performed it on my Schecter Omen 6. Single-conductor SD '59 in the neck, and a four-conductor DiMarzio Breed in the bridge. Now, the wiring diagram that Schecter's site had was pretty inaccurate, so I made do with the grounds and whatnot. Alas, it doesn't work.

The issues:
1. The Breed (bridge) doesn't work at all.
2. The '59 (neck) works on all three pickup selections (even on the bridge one!)

Now, as far as I know, the fact that one is four-conductor and one is single-conductor shouldn't be affecting anything, right? I'm fairly confident that the issue lies in the switch and/or in the way I wired the Breed. The guitar isn't buzzing through my amp or shocking me, so the grounds are most likely okay, but I followed the DiMarzio directions completely (in terms of colors) so I'm not sure what's up. Anyone have any idea what the issue might be?

I'll get some pictures ASAP.
Ibanez RGA121 | ESP LTD H-1000
Axe-FX Standard