#1
So I'm dropping a few Vintage 30's into my Valveking 212 but I'm slightly confused about the Ohm ratings, obviously you can get 8 or 16 Vintage 30's but I'm assuming because I'm using 2 Speakers I need to get 2x 8 Ohm Vintage 30's, am I correct or am I misunderstanding the whole Ohm's thing? xD
Jackson DK2M - White
Peavey Valveking 212
Ernie Ball - Skinny Top, Heavy Bottom strings
#2
Excuse the bump, but all I need is a quick answer to this question and I'll be happy ^^
Jackson DK2M - White
Peavey Valveking 212
Ernie Ball - Skinny Top, Heavy Bottom strings
#3
If the amp runs at 16 ohms, you're correct: Two 8 ohm speakers in series.
You Don't Need a halfstack.

You Don't Need 100W.

Quote by jj1565
i love you slats.
#4
Quote by slatsmania
If the amp runs at 16 ohms, you're correct: Two 8 ohm speakers in series.


Perfect, thanks
Jackson DK2M - White
Peavey Valveking 212
Ernie Ball - Skinny Top, Heavy Bottom strings