I'm replacing my friends Jackson DXMG pickups and i ran into a problem. He never gave me the replacement pots or a new selector switch. so i can rewire the old pots and the old switch with the new pickups?
i'm saying can you reuse the pots and selector switch when replacing pickups.
Depends on what kind of pickups your using.
i'm replacing them with passive dimarzio Super 3 bridge and Dimarzio Breed neck.
You should be able to use the same then. Just put solder the new pickups as the old ones were.
ok it makes my job a whole lot easier now that i don't to charge him for the new pots and switch.