#1
im planning on gettin some better guitar gear and i like the epiphone dot (the gibson 335 is too expensive) but ill been 2 replace the bridge pick up

so does any1 know how u change a pick up on a epiphone dot (335)?

thanks
Twitter: ScottWotton
Tumblr: ScottWotton
YouTube: ScottWotton

3DS FC: 5043-1553-4655
Friend Safari: Rock type with Boldore, Pupitar and Barbaracle.

Wants his username as ScottWotton. >.>
#2
1. open up the electronics cavity
2. use a soldering iron to remove the existing pickups from the pots
3. unscrew the existing pickups and remove them
4. do the opposite with the new ones BUT MAKE SURE THEY'RE PROPERLY GROUNDED

done
http://sheepshape.co.uk

Gretsch White Falcon

Fender Volume-Tone
TC Electronic Polytune
Digitech Whammy
Vox V847-A
Ibanez TS9
Menatone Red Snapper
Marshall EH1
Boss DD7
Boss CE5
GLX NG100
EHX Cathedral
Vox AC15CC1
George L's
EBow
#3
there is no back plate

i no how 2 change pick-ups i need 2 no how u do it if ur guitar doesnt have a back plate and the pots r attached to the wood of the guitar
Twitter: ScottWotton
Tumblr: ScottWotton
YouTube: ScottWotton

3DS FC: 5043-1553-4655
Friend Safari: Rock type with Boldore, Pupitar and Barbaracle.

Wants his username as ScottWotton. >.>
#4
unsrew the pot and try putting it out of the F hole lol! not sure if it will work but they had to get em in there somehow.
EPIPHONE LES PAUL
IBANEZ S SERIES CUSTOM
VOX AD30VT
#5
is there a cheap video that shows this and how do you make sure its properly grounded.