#1
Vintage guitar head made in the 40s. It only puts out about 5 or 6 watts:

http://www.grouseguitars.com.au/sold/oldwoodenamp.htm


Ok now I'm just looking for a cheap cab to plug it into. I found this one for just $50:

http://www.musicswopshop.com.au/images/stockThumbnails/DSCN6336-MSS%204561.JPG

AKAI SS-110
10 watt 1X10" & Tweeter @ 8Ω

I know it's a bass cab (Is it really? I always thought that a cab with a tweeter is definitely a bass cab), but will it work???

Thanks guys
#2
Quote by indra13
Vintage guitar head made in the 40s. It only puts out about 5 or 6 watts:

http://www.grouseguitars.com.au/sold/oldwoodenamp.htm


Ok now I'm just looking for a cheap cab to plug it into. I found this one for just $50:

http://www.musicswopshop.com.au/images/stockThumbnails/DSCN6336-MSS%204561.JPG

AKAI SS-110
10 watt 1X10" & Tweeter @ 8Ω

I know it's a bass cab (Is it really? I always thought that a cab with a tweeter is definitely a bass cab), but will it work???

Thanks guys


It'll work so long as the impedances match.
Quote by zgr0826
My culture is worthless and absolutely inferior to the almighty Leaf.


Quote by JustRooster
I incurred the wrath of the Association of White Knights. Specifically the Parent's Basement branch of service.
#3
I'd get the specs on the head -find out for sure what ohms it runs at- and then maybe build a 1x12 for it. Without too much info on that cab, it doesn't sound so promising.
You Don't Need a halfstack.

You Don't Need 100W.

Quote by jj1565
i love you slats.