#1
If I wanted to build this
http://aronnelson.com/gallery/main.php/v/DRAGONFLY-LAYOUTS_0/album14/album143/EH_HOGS_FOOT.jpg.html
for guitar, what would some good cap values be? I built this
http://aronnelson.com/gallery/main.php/v/DRAGONFLY-LAYOUTS_0/album14/album143/EH_LPB1_001.gif.html
and I thought it sounded to bassy. If I made the polerized caps 1 uf and the ceramic caps .068, would that back off the bass?
#2
build an AMZ mosfet boost. i've tried two boosts and made five boosts, and it's the best one. so transparent, 35dB of available gain.
Call me "Shot".

ShotRod Guitar Works

Custom Hand-wired Amplifiers and Effect Pedals.

Est. 2007


Source to everything I say about Guitars, Pedals, and Amplifiers: I make them.


UG's Best DIY PedalBoard
#3
Well, I wanted to try this one, but where can I find a layout for the mosfet? looked at aron nelson's gallery, but didn't see it. Any idea's on the cap sizes?
#5
I used 0.1 on the lpb and it was all bass. My question on the polarized caps was about the hogs foot.