#3
fret buzz giving you problems? try adjusting the saddle, but i believe you do that as a last resort, i cannot exactly think off the top of my head what all else you can do, ..... im starting to think that prettys much it, or the most effect way to do so to that string and that string only. you could adjust the rod tension in the neck but of course, that would affect all the strings, most likely its just the string heigth is a bit too high on it ) just adjust the saddle thats what i would do.. wait for more posts!
#4
raise your bridge a little
Quote by rcw110131
Don't be gay you retard.
#5
When you pick the high e string and you let it ring theres a weird pulsating noise especially when you switch to bridge pickups....
#8
It sounds like the string's slightly too low, but rubbing a pencil over the nut too, to make sure the zero fret is properly lubed up.