#1
i found recently that my amp is sounding very deep and unclear when the amp is in clean mode, i think it may be damaged scinse i was using my amp to play innto the computer one day, then i plugged the amp in the headphone port to play back what i had recorded, forgot about it, later came back and turned music on, it was extremely loud and im wandering if this is the problem

all the settings i usually have it on are the same,

the amp is a stagg 40 watt transistor amp.

and no the amp is good enough, unless its broke
"
#2
did you move the tone knob on your guitar without noticing? just a thought you might have turned it to zero that might make 'very deep and unclear'
#3
Quote by rougegratton

the amp is a stagg 40 watt transistor amp.


There's your problem.

Just kidding.

Yeah, check your tone knob on your guitar.
Call me Wes.
Gear:
Fender American Deluxe HSS Strat
Chicago Blues Box Roadhouse
Bad Cat Cougar 5
1957 Gibson GA-5
Ceriatone 18w TMB Combo
Hughes & Kettner Tube Factor
Various Ibanez TS9s
Weber MASS Attenuator
#5
Hrhmm...
Really not sure what to tell you. Maybe your amp bit the dust or something.
Call me Wes.
Gear:
Fender American Deluxe HSS Strat
Chicago Blues Box Roadhouse
Bad Cat Cougar 5
1957 Gibson GA-5
Ceriatone 18w TMB Combo
Hughes & Kettner Tube Factor
Various Ibanez TS9s
Weber MASS Attenuator
#6
try some new strings.

How old are the strings you've got on the guitar? Old strings tend to get a bit 'dull' in sound. Newer ones will give you that brighter twang.
New tracks on my profile! Please check them out and see what you think!
#7
the strings are 3 week old ernie balls, like darkbitre said, its probably bit the dust.
thanks for your posts
"