#1
OK so I got my Boss DD-6 this week. I should start putting my pedals in some sort of order. I haven't had much time to mess around with it though, but I would like some tutorials and tips on how to setup my fx chain.

My current pedals are:
Boss ML-2 Metal Core
MXR Zakk Wylde Overdrive
Dunlop Crybaby Classic
Boss DD-6 Digital Delay
Boss NS-2 Noise Supressor
next -> MXR phase 90

I am running these into a Peavey Valveking 112, the amps also got an Effect send/return used for "external low-level effects or processing equipment" if that helps
My gear:

Schecter Revenger FR
ESP Ltd Viper-500 (Seymour Duncan SH-4(N) + SH-12(B))
----
Dunlop MXR Zakk Wylde OD
Dunlop Crybaby Classic
Boss ML-2 Metalcore
Boss DD-6 Digital Delay
Boss NS-2 Noise Suppressor
----
Peavey Valveking 112
#2
The delay should go in the FX loop, the wah, phaser, distortion, overdrive , noisegate between guitar & amp.
Jackson KV 2, Jackson COW 7 (both in B), Jackson Demmelition V
Bogner Überschall (blue rev)
Marshall 1960B Vintage (2x V30 & 2x G12T75)
TC Electronic G Major
BBE Sonic Maximizer 422A
Weber Mass 150w
ISP ProRackG
T.Racks Dinopower
#3
Quote by Ventor
The delay should go in the FX loop, the wah, phaser, distortion, overdrive , noisegate between guitar & amp.

i dunno, if he's using the valveking's overdrive, i'd put the phaser in the FX loop too.
Rig Winter 2017:

Fender Jazzmaster/Yamaha SG1000
Boss TU-3, DS-2, CS-3, EHX small stone, Danelectro delay
Laney VC30-112 with G12H30 speaker, or Session Rockette 30 for smaller gigs
Elixir Nanoweb 11-49 strings, Dunlop Jazz III XL picks
Shure SM57 mic in front of the amp
#4
Thanks for the repsonse guys. I am using the amps overdive sometimes with the OD pedal. But mainly just the clean channel with the ML-2. So should I just put the phaser and the delay in the amps loop. In which order should may pedals go? At the moment they are:

weapon ->Wah ->NS-2 in ->NS-2 sent ->OD ->ML-2 ->DD-6 ->NS-2return ->NS-2 out ->amp


I like to be able to use my NS-2 to cut the signal to my amp.
My gear:

Schecter Revenger FR
ESP Ltd Viper-500 (Seymour Duncan SH-4(N) + SH-12(B))
----
Dunlop MXR Zakk Wylde OD
Dunlop Crybaby Classic
Boss ML-2 Metalcore
Boss DD-6 Digital Delay
Boss NS-2 Noise Suppressor
----
Peavey Valveking 112