#1
Alright, this is the last RG100ES mod I'm gonna post...I SWEAR.

If you'd like to add more dirt/fuzz/gain/distortion to the number 2 channel of your Randall, here's how to do it.

There is a 4.7k ohm resistor that you'll need to replace with a 10k ohm resistor. I suggest cutting the 4.7k ohm resistor as close to the resistor and pc board as possible, leaving as much of the leads remaining as you can; this way you can solder the 10k ohm resistor to these leads.

As always, if you're interested in doing this mod, email me for detailed high resolution photo(s).

BTW - I am still looking for the CFH diode mod for this amp (i.e.; Marker/deanguitar forum) - if you know where I can get my hands on it, please let me know ASAP. I wanna put these amp mods to bed and get jammin'.


Cheers!

PS: I am using all three mods that I have posted to this forum on my Randall, and I think they sound awesome. Just curious to see what someone else thinks of these mods.
Last edited by bmwfreq at Apr 27, 2008,