#1
How would you straighten teh last 5 frets of a guitar neck if the truss rod just wont cover it?
#2
what type of guitar?

are you getting buzz? have you adjusted action first at the bridge?
Jenneh

Quote by TNfootballfan62
Jenny needs to sow her wild oats with random Gibsons and Taylors she picks up in bars before she settles down with a PRS.


Set up Questions? ...Q & A Thread

Recognised by the Official EG/GG&A/GB&C WTLT Lists 2011
#4
what type of guitar, what type of bridge?
Jenneh

Quote by TNfootballfan62
Jenny needs to sow her wild oats with random Gibsons and Taylors she picks up in bars before she settles down with a PRS.


Set up Questions? ...Q & A Thread

Recognised by the Official EG/GG&A/GB&C WTLT Lists 2011
#5
it has to be the truss rod if its buzzing or there is a very slim chance that the steel on the inside of ur string busted but that almost never happens and will only apply if its buzzing on just 1 string
BASS GEAR:
Fender Bassman 250 2x10
Squier MB-5
Tanglewood Premier TW155 acoustic bass

GUITAR GEAR:
Ibanez ART300
Fender GDC-200SCE
Peavey studio chorus 70

PEDALS:
Ibanez SM-7
Ibanez PH-7
DOD Bass Chorus
#6
Its a Kay Strat, and it has the stock bridge. I think it may be from my friend leaning it in the corner for too long.
#7
make sure the bridge is level.

fret the low E first fret, at the same time,
fret the low E last fret, where the neck and body meet.

with both places held, look at the middle frets, 7-9th.

if the string lays on the fretwire there, you still dont have enough bend,

if the string is more than a credit cards thickness up from the wire there, you could use more bend.


i'm just tryin to see, where you are right now.

it might be a high fret. could be the bridge.
Jenneh

Quote by TNfootballfan62
Jenny needs to sow her wild oats with random Gibsons and Taylors she picks up in bars before she settles down with a PRS.


Set up Questions? ...Q & A Thread

Recognised by the Official EG/GG&A/GB&C WTLT Lists 2011