#1
Hi i use hughes and kettner tubeman MKII Guitar Preamp and i play it in to the send return hole connections ok!!
and now i trying to use on stage a wireless system{shure guitar wireless}and the point is.. my distortion drive is to low than when use cables for the connections!!
for example when i use cables {send/return} and i set my dist/drive to point 7 everything is ok..
and when i use the wireless system the dist/drive from 7 for example falling down to
4 !!!what happened.. why loose like that the dist/drive??
the battery is ok everything is ok ..any idea any solution?????
thanks!!
#3
Whyr you plugging into the effects loops and not the pre-amp input?
Gibson Les Paul Studio
Epiphone SG Special Customshop
Jackson JS30RR

Dunlop Crybaby Original
Boss Metal Zone
Digitech Screamin' Blues
Ibanez Lo Fi
Behringer Tuner

Marshall AVT100X


Quote by IUseAPurplePick
Quote by Joshrocker48
I Use a purple pick.

+1
#4
Isnt the wireless just supposed to plug into the input jack. With in the send return you will pretty much be bypassing the preamp.