#1
Hi guys, Thinking about making a guitar cabnet for my Randall RG75G3. It's going to be a 2x12 cabnet. Just wanted to know about how I choose speakers... Like what do I need in terms of Watts? And stuff. The amp is a 75w. Just anyhelp on how I should select speakers would be helpful.
ESP Eclipse-II VTB (With 18v Mod)
Randall RG75
Tapco Mix60
New Zealand
#2
If you're using two speakers on a single output, each speaker should be rated for no less than half of the output power.

If there are two channels each rated for 75 watts, try to keep the speaker wattage rating at or above your amp's rating.

Also, you want to be sure to match impedances (ohms). For example, if a single output impedance is 8 ohms, you'll want either two 16 ohm speakers wired in parallel, or two 4 ohm speakers wired in series. If you have two outputs rated at 8 ohms each, then match each output with it's own 8 ohm speaker.