#1
alright I'm currently in the wiring stage of my first guitar project and I'm a bit confused on the setup.

the pickups i got are seymourduncans: 2 single coil, 1 humbucker at the bridge
like this
but instead of using the five-way switch I was going to do 3 on/off switches, one for each pickup
like so
im a little lost on which wires (on the humbucker) go where
im sure this is a pretty noob question but any help would be appreciated
You are now blinking manually
#3
mmk, so red and white would go to the switch, right? green and bare to ground. what abou the black?

and not really any benefit i just dont care for the 5-way. really just for the hell of it
You are now blinking manually
#4
Quote by Keyphur
mmk, so red and white would go to the switch, right? green and bare to ground. what abou the black?
No. He mis-typed. I know exactly what he meant to say:


Quote by forsaknazrael
Solder the red and white wires together. tape them off. I believe green and bare go to ground, and red BLACK is hot. Can you figure it out from there?
*fixed*
Meadows
Quote by Jackal58
I release my inner liberal every morning when I take a shit.
Quote by SK8RDUDE411
I wont be like those jerks who dedicate their beliefs to logic and reaosn.