#1
just bought a fender tube amp hot rod deville. The problem is hear crackling almost as if the cable is messed up but i know that isnt the problem cause i have changed cables, same problem. changed amps and there is no crackling noise. Does anyone know what the problem is?
#2
Did you buy it new or used? Also this should be in GG&A
Gear:
Epiphone SG Standard - Natural Wood Finish + SD Alnico Pro 2 Bridge Pickup
Epiphone Les Paul Standard - Limited Edition Green
Ibanez S470
Blackstar HT-100 Head
Harley Benton 2x12 Vintage 30's
Vox AC4TV
Vox VT15
#3
Maybe a fuse is on it's last legs. Happened to me when I first got my JCM900.
Gear:
Epiphone SG Standard - Natural Wood Finish + SD Alnico Pro 2 Bridge Pickup
Epiphone Les Paul Standard - Limited Edition Green
Ibanez S470
Blackstar HT-100 Head
Harley Benton 2x12 Vintage 30's
Vox AC4TV
Vox VT15
#4
It sounds as though your tubes have become microphonic - wiggle the amp a little bit, if the crackling is heard, then this is probably your issue.

If the crackling gets louder/quieter when you adjust your gain, then your preamp tubes are suspect. Otherwise, it could be the power tubes.
Schecter C-1 Classic (Antique Amber)
Ibanez JEM 7VWH
Crate Palamino Class A tube combo
Digitech RP80 Multieffects pedal
Ibanez TS9 DX Tube Screamer
#6
Have You Checked The Input Jack On Your New Amp????? Prolly Looose~!!!!!!!!!!!!!
Amps:
Crate V3112
Mesa Mk IVB

Guitars:
Ibanez SZ320
BC Rich Mockingbird Special X
Michael Kelly Patriot Custom

Effects:
Too Many to list.
#7
Quote by BLDNJA
its new, i will check it out though


Yes but if it's a floor model, it might as well have been used.
Schecter C-1 Classic (Antique Amber)
Ibanez JEM 7VWH
Crate Palamino Class A tube combo
Digitech RP80 Multieffects pedal
Ibanez TS9 DX Tube Screamer