#1
I'll be building my own pedalboard, and using velcro to attach all my pedals. What worries me is pedals like the Crybaby and Whammy. In the case of the Crybaby, when I take the little rubber legs off (in order to put the velcro on) the bottom metal floor thingy slides around a lot. Are there any ways to get around this? Leaving the rubber legs on will cause the pedal velcro to not touch the board.

Thx in advance
Gear:

Ibanez XPT707FX
Ibanez RG7321 (DiMarzio D-Activator 7 Pickups)

Dunlop Crybaby 535Q Wah-Wah
DigiTech Whammy WH-4
Boss RC-20XL Loop Station

Line 6 Flextone III Plus w/FBV2 Footswitch
#2
glue some wood to the bottom of the pedals so that when you put the velcro on it sticks past the feet
My Rig
>MIM Fender Stratocaster and SX SJM-62
>various magicial noise boxes
>Peavey Classic 50 212

For the funk:
>Ibanez ATK300
>Acoustic B100
#3
You can pull the screws out of the rubber feet and reattach them to keep it in place.
Mitch Hedberg Group
http://groups.ultimate-guitar.com/koalabears/

Quote by Irnmaiden4life
why didnt you just play like crap?
if you need help with that, ask Vincent745



Quote by imgooley
Awe, so cute...

How old are you?



Quote by H4T3BR33D3R


Old enough to yell rape.
#4
just unscrew the 4 screws with the rubber feet and replace them with slightly shorter screws.. then it will be flush and you can attach it to the board with ease
#5
I unscrewed the legs with the feet, just like SSL27 said, and put new screws in already, but the hole seems slightly larger than the screw. It doesn't affect the pedal's operation or anything, it's just very annoying and makes me think sumthin's gonna break. Any help?
Gear:

Ibanez XPT707FX
Ibanez RG7321 (DiMarzio D-Activator 7 Pickups)

Dunlop Crybaby 535Q Wah-Wah
DigiTech Whammy WH-4
Boss RC-20XL Loop Station

Line 6 Flextone III Plus w/FBV2 Footswitch
#6
go with my original idea or go to a hardware store to get bigger screws
My Rig
>MIM Fender Stratocaster and SX SJM-62
>various magicial noise boxes
>Peavey Classic 50 212

For the funk:
>Ibanez ATK300
>Acoustic B100
#7
No, I meant you can take the screw out of the rubber foot. As in the two come apart.

I shall draw a picture.


0--
(rubber foot and screw together)


0 --
(rubber foot separated from the screw.)

They pull apart just like in my pretty picture.
Mitch Hedberg Group
http://groups.ultimate-guitar.com/koalabears/

Quote by Irnmaiden4life
why didnt you just play like crap?
if you need help with that, ask Vincent745



Quote by imgooley
Awe, so cute...

How old are you?



Quote by H4T3BR33D3R


Old enough to yell rape.
#8
i just got four small tin brackets (with holes pre-drilled) from the hardware, hit them flat with a hammer.

then i removed the screws/rubber feet. took the screws out.

then i attached one end of the bracket to the underside of the wah using the original screw.

i then was able to screw the crybaby down onto the board with some wood screws. doesn't move at all!