#1
Hye guys, basiclly i have a Laney GH50L which is a 1 channel Amp

With my band i have a clean section, and distortion..
The Clean is with a multi effects pedal. The distortion is with the Amp

Any ideas on how i can use both of them?

I was thinking using a channel switcher

So... Guitar goes into a channel switcher. Channel A = AMP Channel B = Multi effects onto a PA system?

Any other ideas?
My Stuff
The good
Ibanez RG550
Laney GH50L (Head)
Laney 4x12 TT (Cab)
Jim Dunlop Wah-Wah
Boss ME-8 Multi Effects
Marshall Blues Breaker
The Okay
H/H 100 Watt Combo 1975
Ibanez GRX 420
The Ugly
Marshall 15 Watt MG
Strat Copy
#2
Swap it the other way around? Use amp cleans and distortion with pedal? I know Opeth do that, but they have GT8's I think.
#3
Yeah, but i want the distortion from my amp.

The effects pedal can stay always on the Clean
And then the Amp Distorted

The a channel switcher?

Not sure if it would work
My Stuff
The good
Ibanez RG550
Laney GH50L (Head)
Laney 4x12 TT (Cab)
Jim Dunlop Wah-Wah
Boss ME-8 Multi Effects
Marshall Blues Breaker
The Okay
H/H 100 Watt Combo 1975
Ibanez GRX 420
The Ugly
Marshall 15 Watt MG
Strat Copy
#4
If it's a one channel amp a channel switcher won't do anything.

Get an EQ pedal and set it to a really low volume, it'll probably sound awful though.
#5
its not a channel switcher for the amp, its a Pedal that will just go

Channel A -- Amp -- PA System
Guitar -----------
Channel B -- Multi FX -- PA System

The pedal will switch between A and B
My Stuff
The good
Ibanez RG550
Laney GH50L (Head)
Laney 4x12 TT (Cab)
Jim Dunlop Wah-Wah
Boss ME-8 Multi Effects
Marshall Blues Breaker
The Okay
H/H 100 Watt Combo 1975
Ibanez GRX 420
The Ugly
Marshall 15 Watt MG
Strat Copy