#1
so my friend gave me his original cry baby to look at to see if I could figure out what was wrong with it.

When you plug it in and it isn't switched on the effect is bypassed like it should be but when you engage the wah (whist not playing anything) and put it all the way forward you hear nothing, then if you rock it back it squeals like feedback.

All I have done is disassembled it and checked to see that all the solder joints were good, and they are.

any ideas?
Gibson Explorer
Jackson Soloist SL3
Orange Tiny Terror
Mesa 2x12
#2
I forget who, but some guy on UG does wah mods. He might know. I personally have no idea.
-Andrew H
band: syncopated groove punch
#3
its possible that the switch went bad, like the switch in the footpedal. im not exactly educated in things like that, but it could be posisble
#4
well I'll just hope that the person happens to stumble upon this thread and shed some light on my issue.
Gibson Explorer
Jackson Soloist SL3
Orange Tiny Terror
Mesa 2x12
#6
replace the switch then report back, also get a multi meter and check the components
Quote by Deliriumbassist
Antisocial Behaviour Order. A chav's equivalent of GCSEs.