#1
ok so i have a LFR on my damien. earlier today i noticed the low e string kept coming out of tune. after few minutes of messing with the bridge, i noticed the locking nut by the headstock, was loose. i tried tightning it, and it didnt tighten. it just stayed loose. now i can just push it in and pull it out with my fingers. how do i fix this? or do i need new locking nuts?
Fender MIA Standard Strat
ESP LTD Viper 407
Epiphone SG
Starcaster by Fender(modded with Bill Lawrence l-500-xl)
PEAVEY 6505+ (FJA transistor modd)
Peavey 65 watt transtube studio-112
Marshall 1960AV
Vader 2x12
ISP Decimator
MXR 10 band EQ
#2
Your nut is jammed. Take it to a guitar tech at your local guitar shop. Don't take it out yourself, cuz you could damage your guitar in the process.

By the way, did you know that if you leave your locking nut resting on your string, then it stays in tune better, especially if you use the bar a lot? A guitar tech told me that. And it's true, I've tried it both locked and unlocked. It stays in tune better with it unlocked.
#3
no, like when i tried tightening it, it wouldnt. i think i needto drill a new hole.
Fender MIA Standard Strat
ESP LTD Viper 407
Epiphone SG
Starcaster by Fender(modded with Bill Lawrence l-500-xl)
PEAVEY 6505+ (FJA transistor modd)
Peavey 65 watt transtube studio-112
Marshall 1960AV
Vader 2x12
ISP Decimator
MXR 10 band EQ
#4
is the screw stripped or warped?
Why you reading this?
Quote by 742627000017
I use my thumb and my johnson

Quote by deanexplosion99
idk what the keys are for but the reason i think its for the floyd rose is because its called floyd rose double locking

Quote by niggafolife
i iz hurr tuh spek da troof abowt muzik