#1
i have buzzing on the open 6, 5, and 4 strings and every string on the first 2 frets to the point where i can't here the note.

do i have to adjust the action or truss rod, or is it something else? this wasn't like this before and i guess i might have not noticed it for a while but i heard that the change in temperature can mess with the truss rod. i never had any experience with adjusting the truss rod so if its that should i just bring it to the shop?

btw, it has a floyd rose.
Gear:
Schecter Synyster Custom
Schecter C-1 Elite
Crate GFX65
Korg Toneworks AX1500G pedal board
Morley Wah pedal
#2
truss rod adjustment for the first few fret buzzes
Ibanez RG321MH (Air Classic/Tone Zone)
Fernandes Telecaster (Twang King/stock bridge pickup)
Blackstar HT-20 (Scumback 55 speaker/ Tung Sol tubes)
TC Electronic Nova Repeater
Lava Cables Clear Connect, Soar and Mini ELC
#3
check that ur bridge is level,

then fret the low E first fret, at the same time
fret the low E last fret, where the neck and body meet.

with both places held , look at the middle frets 7-9th

if the string lays on the fretwire there, not enough bend
if the string is more than a credit cards thickness up from wire there, then too much bend

look and repost
Jenneh

Quote by TNfootballfan62
Jenny needs to sow her wild oats with random Gibsons and Taylors she picks up in bars before she settles down with a PRS.


Set up Questions? ...Q & A Thread

Recognised by the Official EG/GG&A/GB&C WTLT Lists 2011
#4
the bridge is level

and when i fret the first fret and the last fret it lays on the fretwire
Gear:
Schecter Synyster Custom
Schecter C-1 Elite
Crate GFX65
Korg Toneworks AX1500G pedal board
Morley Wah pedal
#5
Quote by metalzrulez
the bridge is level

and when i fret the first fret and the last fret it lays on the fretwire


not enuf relief. take it to tech or adjust truss rod yourself
Ibanez RG321MH (Air Classic/Tone Zone)
Fernandes Telecaster (Twang King/stock bridge pickup)
Blackstar HT-20 (Scumback 55 speaker/ Tung Sol tubes)
TC Electronic Nova Repeater
Lava Cables Clear Connect, Soar and Mini ELC
#6
Quote by metalzrulez
the bridge is level

and when i fret the first fret and the last fret it lays on the fretwire



if you want to adjust the truss rod urself then slack the strings enough to get to the truss rod, turn Counter Clockwise 1/8". that's a very small amount.

then tune up the guitar and leave it for at least an hour.

dont force the turn. and remember, it's a small adjustment.


remeasure, see if the string is off the fretwire.

repeat another 1/8" turn, if you need more bend.
don;t turn more than 1/4" total for the day.
Jenneh

Quote by TNfootballfan62
Jenny needs to sow her wild oats with random Gibsons and Taylors she picks up in bars before she settles down with a PRS.


Set up Questions? ...Q & A Thread

Recognised by the Official EG/GG&A/GB&C WTLT Lists 2011