#1
Hi,

I have a B52 AT100. but i don't have the footswitch that goes with it.

any suggestions of one?

thanks
#2
you can make one pretty easily. I got my at-112 and it was the GC last one, and it didn't come with a footswitch, or the wheels, lol.

But all it consists is hooking it up to a switch and connecting the hot tip of the wire to ground which switches the channel. or you can use a stereo switch that connects either the tip of the sleeve to ground which will let you change the channel, and turn the reverb off and on i believe, but i never do that
-------------------------------
Faded Gibson SG Special - Black ice mod
Seymour Duncan SH-5 in bridge
B-52 AT 112
Ted Weber Mass100 attenuator
EHX Small Clone
EHX Metal Muff
DIY Modded tubescreamer
Dunlop 535Q Wah
Wax Potting tutorial
#3
oh ok. that might be an option. im not a very good builder. but maybe.

is there nowhere i could buy one that would work?
#4
probably best guess is ebay. I'm pretty sure most (if not all) footswitches work the same
-------------------------------
Faded Gibson SG Special - Black ice mod
Seymour Duncan SH-5 in bridge
B-52 AT 112
Ted Weber Mass100 attenuator
EHX Small Clone
EHX Metal Muff
DIY Modded tubescreamer
Dunlop 535Q Wah
Wax Potting tutorial