#1
i have the voodoo lab pedal power which owers 8 pedals..

if i was to have more than 8 pedals..

i have a boss tu2 which allows to daisy chain right?

could i power this with the voodoo then daisy chain from the boss to another?

would i get ground hum or lose any quality?

the reason i ask is because i spent alot on the voodoo so i would have good power with no hum if ya know what i mean... im tryng to keep good quality throughout my pedal board!

im planning on 9 pedals thats all!!

cheers!!!!!
own;
peavey 6505
marshall 1960av cab
esp ltd ec1000 18V M0D
schecter black hawk
prs standard 24 platinum grey
ibanez aeg10e acoustic

want;
dual rectifier 3 channel head
prs custom 24
tremonti se (duncan p/ups)
schecter tempest (red)
#2
You can daisy chain how many pedals as you want, just like with a normal with a wallwart style power supply, as long as you keep the total mA draw under what is available (250 mA for the L6 outputs, 100 for the rest).
#3
sorry im so dumb by l6 did u mean line 6 pedals..?

my setup as follows..

morley bad horsie wah
boss tu 2
mxr phase 90
maxon od808
isp decimator
ehx holy grail
ehx chorus
maxon ad9 delay
boss compressor sustainer

will that be ok?

all 9v i beleive?

so if i just power all of them of the voodoo then daisy the tu2 to the compressor would that be ok??
own;
peavey 6505
marshall 1960av cab
esp ltd ec1000 18V M0D
schecter black hawk
prs standard 24 platinum grey
ibanez aeg10e acoustic

want;
dual rectifier 3 channel head
prs custom 24
tremonti se (duncan p/ups)
schecter tempest (red)
#5
with no hum? using the daisy?
own;
peavey 6505
marshall 1960av cab
esp ltd ec1000 18V M0D
schecter black hawk
prs standard 24 platinum grey
ibanez aeg10e acoustic

want;
dual rectifier 3 channel head
prs custom 24
tremonti se (duncan p/ups)
schecter tempest (red)