#1
I don't really like the neck on my standard Strat and was wondering if I could replace it with a 1962 reissue neck, would it fit?
#2
measure the depth, length, and width of the neck pocket in your strat and then get the measurements of the neck you want to replace the current neck with and if they match up, you should be fine. If they're really close to matching but they don't, you can do some sanding to get them to fit.
Quote by forsaknazrael
You should probably mug John Frusciante or Ritchie Blackmore. They're small guys, we could take 'em.

Just look out for that other guy in the Red Hot Chili Peppers, Will Farrel. He's a tall mofo, got a long reach.



Quote by Invader Jim
I give up.

#4
Quote by VoodooCow229
measure the depth, length, and width of the neck pocket in your strat and then get the measurements of the neck you want to replace the current neck with and if they match up, you should be fine. If they're really close to matching but they don't, you can do some sanding to get them to fit.


Alright, thanks for your reply.