#1
Basically, to cut straight to it, the bridge pickup in my guitar doesn't work at all, whereas the middle and neck pickups are fine, I tohught it was just the pickup selector, so I replaced it and I still have the same problem, I have checked the wiring and everything is fine, any thoughts?

The pickup is a Seymour Duncan SH-13 just for the record.
#2
check for any dry solder joints in the pickup itself. Use an ohmeter if possible
#3
Quote by gibder
check for any dry solder joints in the pickup itself. Use an ohmeter if possible


Can't actually get into the pickup, its sealed.