#1
I was thinking of purchasing a Warwick Sweet 25.1, and I wanted to know if it could be used as a cab for a different amp head. I saw on a picture of it that a little cord comes out from the speaker section into the back of the amplifier. Could I maybe replace it with a longer speaker cable to allow it to be used as a speaker cabinet?
Gear:
Ibanez RG4EX1
Laney VC50
Roland Cube 30X
Boss MD-2

Ibanez GSR200

Official Newbie Of The 'Australia FTW!' Club PM Alter-Bridge Or The_Random_Hero To Join. Australians only.
#2
Yeah you could do this for sure.

Just make sure the cab's wattage doesn't exceed that of the amp and that it doesn't put too much load on the amp.

Gear:
Fender Standard Jazz Bass
Artec Matrix Pedal Tuner
BBE Optostomp
Boss GEB 7
EHX NYC Big Muff
Ashdown MAG C410T-300
Torque T100BX
GAS-ing for:
Boss SYB5
Behringer Intelligate IG9
#3
I'm not sure whether it is at 8 ohms or 4 ohms. I know that it has a line out, but I thought that normally ment that you didn't get the full 250w out of it unless another cab was connected.
Gear:
Ibanez RG4EX1
Laney VC50
Roland Cube 30X
Boss MD-2

Ibanez GSR200

Official Newbie Of The 'Australia FTW!' Club PM Alter-Bridge Or The_Random_Hero To Join. Australians only.