#1
I need help setting my ts9 to my 6505 for a real good tight sound. I have my settings set
pre gain-7 low 7 mid 4 and high 6 and my resonance and presence at 10 and 9. Hope that helps hopefully someone can help me out.
#2
gain all the way down, level all the way up. then adjust tone how you want. then if you want, try turning up the gain slightly
Originally posted by primusfan
When you crank up the gain to 10 and switch to the lead channel, it actually sounds like you are unjustifiably bombing an innocent foreign land.


╠═══════╬═══════╣
τλε τρπ βπστλεπλσσδ
╠═══════╬═══════╣
#3
You may want to both do what InanezGuitars44 said, and lower your amp's gain as well.
'89 MIJ Fender Strat
Rivera S-120
'60s PEPCO Model 211 5w head
'60s Paul (Pepco) 1x12 tube amp
'60s Harmony H303a 1x10 tube amp
#4
Ok because I really like tight Trivium kind of tone. I use the lead channel and haven't really found my sound with the rhythm any suggestions? Also when you use an overdrive I notice the feedback kind of thing should I get an isp decimator?