I want to us a push/pull volume pot so that I can also get a single coil sound from my neck humbucker on my Gibson SG

I know this is simple, but I can't seem to find a diagram for it.
my band is here ------> myspace.com/weareattica
Quote by just some guy
i only want to do it to one pickup though...

Then only solder the additional wires from the pickup you want to split to the switch, and leave the other pickup wires soldered/taped together.

Like, duh.
sorry, I don't wire anything...ever...so that is not at all obvious to me...
my band is here ------> myspace.com/weareattica
It's really easy but you have to have the 4 wire (or 3 wire) pup to do it. take the wires that are soldered together (from the coils) and attach it to the switch. ground the other wire from the switch.

When turned on one of the coils will get grounded thus disabling it.