#1
Hi. The output jack in my guitar is broken, again. it's weird because i i know there should be 2 wires attached to the jack, and the black one has now come loose for the second time. The first time it broke, i opened it, asked internet for advice and and i knew what i had to do. the only problem is - the black wire that came loose was dissapeared. i just couldnt find it. Now, the exact same thing happened again, and again, the black wire is just gone.

how can this happen? it's not like it can go anywhere.
PSN name = Barmanation
#2
what guitar do you have?
Schecter Hellraiser C-1 81TW/89
Fender 60th Anniversary Strat with Gibson P/Us
Line 6 Spider III half stack
Dunlop Original Crybaby Wah
Digitech RP50
#4
open up the back plate and look for a loose black wire and solder it back on to the output jack
Schecter Hellraiser C-1 81TW/89
Fender 60th Anniversary Strat with Gibson P/Us
Line 6 Spider III half stack
Dunlop Original Crybaby Wah
Digitech RP50
#5
Quote by jman141
open up the back plate and look for a loose black wire and solder it back on to the output jack



i did that
PSN name = Barmanation
#6
Quote by WantToLearn
i did that


It should be working then
Member of the Bugera Users Militia

Quote by JagerSlushy
Go with Ibanez...Or if you're going high-end, get a Jackson.