#1
The springs from the pickups have fallen down into the guitar because i loosened it too much. Do I need to remove the pickguard to get them and if so, is there a way i can do this without removing my strings because I have only just put new ones on today. Please help. Cheers

btw I hav a Yamaha Pacifica if that helps.
#2
sorry man, you won't get good help here. take it to Electric Guitar
#4
get a thin pencil, stick some blu-tac on the end
attach small magnet to the blu-tac n poke around inside
hope it helps
#5
There is a way actually. I have a strat and all I do is unwind my strings until they almost come out of the tuning pegs and then just open up the pickguard. You might have to use a small screwdriver to get in there but it should work.
#7
ok i got the spring out now how do i keep it in position whilst screwing the screw bak in?
#8
Quote by strat335
sorry man, you won't get good help here. take it to Electric Guitar

This, and I totally thought this was going to be a Beatles thread