how can I drill into a guitar for swithches without messing up the finish, or mesing up the guitar.
go thru it from the back drilling in reverse
Jackson DK2M Dinky Pro W/ EMG 81/85 18v Black
ESP LTD EC-1000 W/ EMG 81/60 See Thru Blue
Schecter C-1 HellRaiser W/ EMG 81TW/89 Black Cherry
Peavey 6505 W/ 2x12 V30
^ I gnore that guy.

Put some masking tape over the area you would like to drill through. Use a drill press. If you don't have one go buy one at Sears or find someone who does, as they're very inexpensive.

Also, use a high quality bit that is the correct size. If you are worried about making the whole in the right place drill a small pilot hole first.

Hope this helps