#1
Ok, well, I'm getting kinda bored with C standard, learned all I can in it, so I figured I go up a half step and mess around with that for a while. I was going to go drop B, but I wasnt sure if I'd have to intonate the damn thing, and reset anything. I know HOW to intonate and tighten/loosen the springs, I was just wondering if I'd have to if I was just going up a half step.

Thanks.

My things:
Bowes SLx7
Washburn WG587
Washburn X40Pro
Washburn X50
Washburn HM24
Washburn WR150
Laguna LE200s
Arietta Acoustic
First Act
Valveking 112
VHT Deliverance

#2
Up half a step... Would probably throw off your intonation about .7%.

If you're switching back and forth to that tuning, don't bother. But if you plan on staying in that tuning, you probably should reintonate.
#3
You'll need to tighten the trem springs a bit too.
Actually called Mark!

Quote by TNfootballfan62
People with a duck for their avatar always give good advice.

...it's a seagull

Quote by Dave_Mc
i wanna see a clip of a recto buying some groceries.


stuffmycatswatchontv.tumblr.com
#4
Alright, thank you.

BTW steven seagull, you give up your CC position?

My things:
Bowes SLx7
Washburn WG587
Washburn X40Pro
Washburn X50
Washburn HM24
Washburn WR150
Laguna LE200s
Arietta Acoustic
First Act
Valveking 112
VHT Deliverance