#1
Hey, i got this Hamer or maybe Slammer guitar body and I cant find a neck for it anywhere....Ive been searching ebay for over a month, plus I tried sites like Mighty Mite and Warmoth but nothing. So does anyone know where online to find one? If not, I'm considering modifying a neck but I need some info if anyone here owns one of these guitars...If you could get pics and measurements of the neck. You should be able to do this by only removing the neck pickup? If I could get the overall length, from bottom end maybe to the Nut should be enough. I think I could probably modify a 24 fret neck or add some extension to a 22 fret neck...

Anyways, any help at all would be appreciated.

#2
I just so happen to play a Slammer...

I counted 'em up,
and there's 22 1/2 frets

22 full frets,
and like a little more wood at the end
Blindfolds aside I'd probably still close my eyes

And try to feel a trembling fetal life inside
that shotgun barrel that's about to make me bleed

Like an ulcer in the stomach of the beast


Quote by Aurex
your sarcasam amuses me


CSUSM
#3
Quote by sneyob
I just so happen to play a Slammer...

I counted 'em up,
and there's 22 1/2 frets

22 full frets,
and like a little more wood at the end


Thanks, but that doesnt really help. I need an actual measurement of the wood itself, from 'end of neck to the nut' would be best. Or maybe a measurement of the bare part? the neck itself extends underneath the neck pickup, so there are no frets at the end, just bare wood....
#5
Measured,
it's a little more than 18 1/2 inches from the end of the neck to the nut,
19 inches from the end to the end behind the nut
Blindfolds aside I'd probably still close my eyes

And try to feel a trembling fetal life inside
that shotgun barrel that's about to make me bleed

Like an ulcer in the stomach of the beast


Quote by Aurex
your sarcasam amuses me


CSUSM
#6
Quote by sneyob
Measured,
it's a little more than 18 1/2 inches from the end of the neck to the nut,
19 inches from the end to the end behind the nut



Is that just the fret board or did you pull the pickup and measure that blank part of the neck underneath? 22 fret neck?
All my guitars measure at about 19" and thats just a normal neck. There would have to like two more inches or so under the pickup for the neck to be screwed down.
#7
I just measured it as it is without taking the neck off or anything

I measured the length between the two red marks in this pic
(Not my guitar)

Blindfolds aside I'd probably still close my eyes

And try to feel a trembling fetal life inside
that shotgun barrel that's about to make me bleed

Like an ulcer in the stomach of the beast


Quote by Aurex
your sarcasam amuses me


CSUSM
#8
Quote by sneyob
I just measured it as it is without taking the neck off or anything

I measured the length between the two red marks in this pic
(Not my guitar)



I need to know about the length of neck that is UNDER the NECK pickup. That is why I showed a picture of the neck pocket.
#9
Can't really help you there,
I still play mine and I don't know enough about guitar construction to take it apart without destroying it
Blindfolds aside I'd probably still close my eyes

And try to feel a trembling fetal life inside
that shotgun barrel that's about to make me bleed

Like an ulcer in the stomach of the beast


Quote by Aurex
your sarcasam amuses me


CSUSM