#1
Hey fellow UGer's.
i have a classic 30 1x12.....could i run that through a Avatar 4x12 safely? the C30 is both 8 or 16 ohms...and the 4x12 ic 8 ohm. that should work right? what cable would you use to connect the two (unshielded, shielded)? and could i disconnect the C30 speaker and leave it unattached to avoid the [meh] sound of that speaker(blue marvel) compared to the [better] V30s? and most importantly, is this all safe to do
#2
Run the C30 combo at 8 ohms and plug into the 8 ohm jack on the cab with a speaker cable.
#3
Quote by AdamDK
Run the C30 combo at 8 ohms and plug into the 8 ohm jack on the cab with a speaker cable.


k thnks, but how do you switch between 8 and 16 on the combo?
#6
def. use an unshielded speaker cable not a guitar cable
Fender American Standard Telecaster
Martin DC-16RE Premium

Fender Snakeskin Champ 12