#1
Hey I was recently doodling in paint and made this and wasnt sure if this is possible to build. Please help me and answer below. Thank you.

#3
Quote by Pablo C
Why wouldn't it?

cause it took over 9000 hours in ms paint to make.

ya, i dont see why not, unless youre referring to the square body. in which case, another why not, seeing as bo diddly has a square guitar.
My Gear:
Gibson Faded Flying V
"Dante's Inferno" Iceman
Fender Hot Rod Deluxe 112
etc.




Quote by freedoms_stain
I can't imagine anything worse than shagging to Mark Knopfler.

Maybe shagging Mark Knopfler, but that's about it.
#5
I don't know because there is so much stuff in that really little space.
Guitars:
Squier Strat (Bad Larry)
'79 Dean V (James)
Ibanez Talman Acoustic (Black Betty)
#6
Sorry for the double post but where should i get all the hardware and what wood should i use on the body?
Guitars:
Squier Strat (Bad Larry)
'79 Dean V (James)
Ibanez Talman Acoustic (Black Betty)
#7
Quote by Millsenator
Sorry for the double post but where should i get all the hardware and what wood should i use on the body?


hardware, stewmac, or allparts, or gfs if you are cheap about it.

Body depends on what sound you want. darker, maybe mahogany, brighter, alder or aash...
#8
ok thanks and a finally question, what tools do i need this will be my first build and considering the shape is it difficult?
Guitars:
Squier Strat (Bad Larry)
'79 Dean V (James)
Ibanez Talman Acoustic (Black Betty)
#9
none, really. it's a square. you could probably get away with a handsaw and a chisel, but that'd take a while.

router and bandsaw are handy, start there.
------

Shwiggity.
#10
Thanks what about for routing the pickups and bridge what should i use for that anything different?
#11
Quote by Millsenator
Thanks what about for routing the pickups and bridge what should i use for that anything different?


A router?

come now, dear sir, does that strike you as too farfetched?

EDIT: also, it's not a custom "F-Hole" if it's not shaped like an 'F'. it's just a sound hole.
------

Shwiggity.
#12
Alright I have found all my Parts

Body: Mahogany

Neck: Ebony

Pickguard: Black

Bridge: Black Floyd Rose

Pickups: Select EMGs

Tuners: Black Schallers

Pots: Standard 500k pots

Switch: Standard Straight 3-way switch

Jack: Standard Fisherman Jack

Paint: Rustoleum Neon Green spraypaint and Lacquer (is spray paint a bad choice?)
Guitars:
Squier Strat (Bad Larry)
'79 Dean V (James)
Ibanez Talman Acoustic (Black Betty)