#1
well i may be ordering a vader 2x12 for my 6505+
the 6505 is 4, 8, or 16 OHMs.
what should i order the cab in to sound the best/loudest?
Fender MIA Standard Strat
ESP LTD Viper 407
Epiphone SG
Starcaster by Fender(modded with Bill Lawrence l-500-xl)
PEAVEY 6505+ (FJA transistor modd)
Peavey 65 watt transtube studio-112
Marshall 1960AV
Vader 2x12
ISP Decimator
MXR 10 band EQ
#3
i can swich it from 4, 8, or 16
Fender MIA Standard Strat
ESP LTD Viper 407
Epiphone SG
Starcaster by Fender(modded with Bill Lawrence l-500-xl)
PEAVEY 6505+ (FJA transistor modd)
Peavey 65 watt transtube studio-112
Marshall 1960AV
Vader 2x12
ISP Decimator
MXR 10 band EQ
#4
You need to get a cabinet that matches any of the Ohm settings on the head. None of the Ohm settings will equal louder - ever.

If the cabinet Ohms are higher than the amp's output Ohms, it will be not as loud.

If the cabintet Ohms are lower than the amp's output Ohms, it can blow your amp.
#6
i read somewhere that the highest ohm setting would sound the best.
that true?
Fender MIA Standard Strat
ESP LTD Viper 407
Epiphone SG
Starcaster by Fender(modded with Bill Lawrence l-500-xl)
PEAVEY 6505+ (FJA transistor modd)
Peavey 65 watt transtube studio-112
Marshall 1960AV
Vader 2x12
ISP Decimator
MXR 10 band EQ