#1
My guitars got 2 volumes, 1 tone, and 2 humbuckers. How would I wire this on. My pickups are inactive emgs.
ESP KH-202 emg-hz
ESP KH-502, duncan custom 5, duncan 59
1978 alverez acoustic
Peavey valveking 100 head
line 6 4-12 cabinet
EVH flange, wilson q-wah, boss chorus ensemble, dunlop brick power supply
#2
Does anybody even know how to?
ESP KH-202 emg-hz
ESP KH-502, duncan custom 5, duncan 59
1978 alverez acoustic
Peavey valveking 100 head
line 6 4-12 cabinet
EVH flange, wilson q-wah, boss chorus ensemble, dunlop brick power supply
#3
That's a Strat-style 5-was switch. You only have two humbuckers. Unless you're going to wire in some kind of coil-tapping, or you have 3 pickups, you should only need a 3-way switch.

For diagrams of how to wire up a slew of different pickup/switching/volume/tone configurations, I recommend this: Schatten Design Book of Standard Wiring Diagrams
#4
I have one thats just like this but 3-way and i dont know where to solder the wires
ESP KH-202 emg-hz
ESP KH-502, duncan custom 5, duncan 59
1978 alverez acoustic
Peavey valveking 100 head
line 6 4-12 cabinet
EVH flange, wilson q-wah, boss chorus ensemble, dunlop brick power supply
#6
go to Gear Building & Customizing you'll probably get a better answer there than in EG
Quote by candysars
Thank you Jesusaurus.
#7
Quote by carpepax
That's a Strat-style 5-was switch. You only have two humbuckers. Unless you're going to wire in some kind of coil-tapping, or you have 3 pickups, you should only need a 3-way switch.

For diagrams of how to wire up a slew of different pickup/switching/volume/tone configurations, I recommend this: Schatten Design Book of Standard Wiring Diagrams


thats a 3 way blade switch.
Quote by Mo Jiggity
What he said. You are a wise man for not buying into the hype.

ya hear that...he thinks im wise