#1
I have found an article on how to convert a normal Fender type tone stack into an active ton stack. Problem is that it is based on JFET, and the conversion involves connecting the ground side of the mid-control to the middle of a voltage divider, which have one of the end connecting to the output of the JFET, and the other one connecting to Vref. Question is, if I convert it to tube base, is the Vref ground, or do I need to calculate the Vref?
Ibanez SA-120 (ed.2006)
BluesJr 1996-B + cathode follower + texas Heat
Crate CPB150
Homemade 4 x 10 cab Bass closeback
Metal Muff
#4
Bump?
Ibanez SA-120 (ed.2006)
BluesJr 1996-B + cathode follower + texas Heat
Crate CPB150
Homemade 4 x 10 cab Bass closeback
Metal Muff