#1
I have a Cort X-6 that im wanting to sell on to get something better (like an ESP). I bought it new about a year and a half ago for £250 UK. There is a very small chip in the finish on the back corner but it cant be seen by anyone watching you play. Some of the black finish is coming of the screws around the pickups but thats all thats wrong with it. The strings couls probly do with replacing.

It has a blue finish with black hardware. The neck is very thin and fast with a smooth finish. Its very similar to an Ibanez RG series guitar.

This is copied from their website

CONSTRUCTION Bolt-on
BODY Basswood
NECK 5pc Stripe Reinforcement, Modern "U" Shape
NECK WIDTH 1F : 43mm / 24F : 56mm
NECK THICKNESS 1F : 19mm / 12F : 21mm
FINGERBOARD
Rosewood, 15 3/4" Radius (400mm)
FRET
24 / Jumbo (2.9mm)
INLAY
White Dot
TUNER
Die cast
SCALE 25 1/2" (648mm)
NUT Locking Nut w/ Retainer Bar
BRIDGE Double locking-III
PICKUP Bluebucker BBHGB-BBMMSB-BBHGB (H-S-H)
CONTROL 1vol, 1tone (w/ push pull), 5way s/w
PICKUP SWITCHING Coil Tap Push Down
Position1 : Neck
Position2 : Neck & Middle
Position3 : Middle
Position4 : Middle & Bridge
Position5 : Bridge
Coil Tap Pull Up
Position1 : Rear Coil of Neck
Position2 : Rear Coil of Neck & Middle
Position3 : Middle
Position4 : Middle & Front Coil of Bridge
Position5 : Front Coil of Bridge
HARDWARE BK (Black)
UNIQUE FEATURE Contoured Body

I was thinking around £140 and i'll even throw in one of those pick holders as its already stuck to the back of the headstock. :p
best signature ever